Imet BS 300/60SH bandsaw

Automatic bandsaw with NC control of the cutting parameters and one way manual mitre 255mm capacity. Ideal for production cutting situations where large quantities of differing lengths are desired from the same material stock. The BS automatics are recognised for their superior design and build quality which is proven in production. Delivering consistent performance and reliability which is backed up by an industry leading warranty package.

CNC automatic bandsaw,hydraulically driven. Mitre cutting from 0° to 45° left in automatic cycle and from 0° to 60° left in semiautomatic cycle.

Easy stops at 0°, graduated plate to identify different angles.
High blade tensioning 1700 kg / cm² to increase cutting accuracy and reduce cutting time.
Up to 99 different cutting lengths and number of cuts can be memorized, with the possibility to repeat them more than once.
CNC with programming of all operations; automatic calculation of the blade thickness.
Machine status shown on display, including blade speed, piece counter, and working anomalies. setting of the cutting lengths, minimal scrap-end 210 mm. Connection for loading table with 2 vertical rollers, unloading slide, connection for unloading table for cutting pieces.
Main switch with minimum tension coil, emergency button, thermic and magnetic motor protection.
Cutting capacity : round till 255 mm., square till 240 mm. and rectangular till 300×180 mm.

Imet BS 300_60 AFI-NC specs

Technical Data

Area angular cut	°	90 +30
Cutting capacity at 90°: round / square / rectangular	mm.	255 / 230 / 300×180
Cutting capacity at 90°: rectangular with cutting bundle	mm.	max 250×120 min 120×20
Blade dimensions	mm.	2765 x 27 x 0.9
Motor Blade Power	KW	1.5
Run of feeder carriage ( repeatable )	mm.	515
Feeder motor power	KW	0.75
Scrap end	mm.	210
Blade speed	mt/min.	18 ÷ 110
Hydraulic unit motor	KW	0.75
Tank capacity tank of hydraulic unit	Lt	20
Capacity coolant tank	Lt	100
Dimensions ( B x L x H )	mm.	1800x1850x1880
Height of work-table	mm.	870
Weight	Kg	680
Minimum cuttable length	mm.	4
Type of functioning		semiautomatic/automatic CNC
Suitable for cutting:		Steel / cast iron / high-strength steels

Features

	Minimal lubrication system OPTIONAL It is possible to require , for all Imet machines, the minimal lubrication system , it avoids the dispersion of refrigerant liquid typical in the use of emulsifiable oil, the life of the blade is not in any way affected.
	Screw feeder In all our automatic NC Bandsaws the movement of the feeder is via a recirculating ballscrew and gear motor controlled by an inverter.
	Position Sensor BS 300 In all our semiautomatic and automatic saws the detection of the start point of cutting occurs automatically through the position sensor.
	Microswitch end cut point BS 300 In all semiautomatic and automatic saws the adjustment of the end cut point is via a lever that activates a microswitch of easy positioning
	Hydraulic Unit and electrical panel BS 300 AFI Practical positioning of the hydraulic unit for easy maintenance, electrical panel located under the control panel.