The H601 is a highly flexible machine, perfect for busy workshops that need both automatic and manual operation. It offers an automatic cycle for production sawing and a manual swing head, typically used in semi-automatic mode for one-way mitre cuts. The inclined sawblade is a standout feature, particularly suitable for cutting square sectional materials, as it provides the path of least resistance through this type of material. This machine excels when working with solid materials as well, making it a popular choice in the industry.
Cutting Control: The H601-NC features a 7-inch touch screen display with simple and intuitive graphics. It allows for different quantities and lengths on the same bar. The operator can store up to 99 cutting programs, which automatically calculates the blade thickness and total number of pieces to be cut. It also allows for setting cutting lengths and managing the automatic cutting cycle.
Cutting Table: The H601-NC is intentionally designed with a large cutting table to provide full support for wide section materials.
Material Feeder: The feeder length is 500mm (also available in 1500mm) and features automatic stroke repetition. It operates on precision 32mm diameter ball screws with a powerful servo motor. The minimum cutting length is 30mm, and the minimum scrap-end length is 100mm. The tolerance for each feeder stroke is +/- 0.2mm on rectilinear bars. The feed vices open on both sides to accommodate out-of-tolerance material and reduce marking.
Saw Frame: The H601-NC has a heavy, rigid steel saw frame for maximum stability and vibration absorption. It is mounted on a large steel column with precision linear guides. To enhance cutting performance, the bandsaw has a high blade tension of 2000kg/cm2.
6° Blade Inclination: The 6° blade inclination provides significant benefits when cutting square and flat materials. It follows the line of least resistance throughout the cut for sectional materials. With solid materials, the initial contact is not across the entire width. These advantages result in extended blade life, faster cutting times, and reduced stress on machine components.
Material Detection Device: A mechanical material height detection device enables fast approach to the material. It then switches to the selected feed speed for cutting and automatically returns to a position 5mm above the workpiece for fast repetition cutting.
Horizontal Supporting Roll: The machine is equipped with a supplementary support roll placed on the loading side. It provides better support for materials, even on larger sizes.
Vice: A short stroke hydraulic vice is installed, which is safer than full stroke designs. It eliminates the chance of damaging the exposed piston shaft. Gap adjustment is done using a handwheel on a lead screw.
Variable Blade Speed: The machine is equipped with an ESC (electronic inverter) for variable speed, making it suitable for cutting different materials.
Cutting Control: A mobile control panel is provided to set all cutting parameters, including LED machine diagnostic indicators.
|Cutting capacity at 90°||Round: 510mm
|Cutting capacity at 45°||Round: 440mm
|Cutting capacity at 60°||Round: 260mm
|Cutting capacity at 90° with bundle||Max 600x250mm
|Cutting capacity at 90° solid (C45)||280mm (350mm with 41mm blade and 4KW motored.)|
|Maximum opening of the vice||620mm|
|Blade motor||3Kw (Option 4Kw)|
|Feeder length||550mm (option F1500)|
|Minimum cutting length||30mm|
|Machine size (working table height)||2650x2900x2170mm (820mm)|
Optional Equipment *:
*These items can be added to your quote
Battery Laser Line (Optional):
German battery powered laser line.
Bundle Cutting Device-52 (Optional):
Hydraulic bundle cutting device for H 601 semi-automatic band saw. Maximum cutting capacity is 600x250mm, minimum 150x60mm
Micro-mist Bandsaw (Optional):
Pure oil micro-mist blade lubrication system recommended for cutting tubes and sectional material where flood lubricant loss through the material is a problem. This precision delivery system allows adjustment for the number of pulses per min, and the quantity of each dose. (requires compressed air supply) The standard flood system is retained for cutting solid material and the operator can simply switch between systems.
Powered Laser Line (Optional):
Imet factory fit wired laser line.
Cutting Angle Display (Optional):
It’s available as a optional the LCD display to view the set cutting angle.
Roller Table Options:
Connection Element for Roller Table (Optional):
This is an optional connection element designed for the unloading side, connecting the roller table to the machine.
Loading/Unloading Roller Table (Optional):
This optional roller table serves both the loading and unloading sides. Each individual element has a length of 1.5m and a capacity of 1500kg. It is equipped with a single leg for support.
Pair of Vertical Rollers (Optional):
This optional feature includes a pair of vertical containment rollers made of steel. A maximum of two pairs can be used for every 1.5m.
Single Vertical Roller (Optional):
This optional feature consists of a single vertical roller with a height of 300mm, designed to prevent falls. A maximum of two single vertical rollers can be used for every 1.5m.