Imet Ktech 502 F2000
Automated twin column cutting centre for producing mitred and straight cut pieces, ideal for frame production, fencing elements, commercial vehicle components and general production. All of the cutting data is put into the simple to use colour touch screen HMI, which provides the storage of 300 programs for cutting data for different cutting angles, piece quantities and cut lengths. The sawblade is uniquely inclined at the end of the cut. This is ideal when cutting square sectional material and flat plate. This feature should not be underestimated, as it has real positive consequences in reducing cut times, greatly increasing blade life and the scope of use of each tooth pitch, whilst reducing the load on the machine components. This feature is also standard on the BS350/400 models. Additionally, this machine benefits from fully hydraulic vices.
Features
Vice:
The vice features a quick-set design with a short-acting cylinder and a standard pressure reducer for thin-walled materials. It can be positioned on either side of the saw blade, depending on the desired mitre direction.
Angle cutting precision:
The cutting precision is guaranteed by the large graduated scale. It includes positive stop locations at 45° to the left, 0°, and 45° to the right.
Saw frame:
Constructed with a robust steel structure, the blade is inclined at 6° to enhance material penetration and optimise cutting of square sections and flat plates. This reduces cycle times, extends blade life, and minimises strain on the machine components. The bow rotates on precision bearings for smooth operation. The KS 502 blade has a tension of 2000kg/cm2 and is equipped with a control microswitch to immediately stop the operation in the event of blade breakage or power failure.
Blade guide system:
The blade guide system is of utmost importance in any bandsaw. Heavy steel guide arms support a set of precision pre-twist roller bearings and solid carbide blade guides, ensuring maximum precision and performance.
Material detection device:
This device automatically detects the height of the material, allowing for a rapid approach to the material before switching to the selected cutting speed. The blade is raised only 1mm above the cut piece, reducing cycle times.
Cutting Control:
The KS 502 is equipped with a mobile control console featuring LED confirmation for blade tensioning, opening of the blade guard, motor thermal block, and electrical tension. Through the control panel, the operator can choose between three different cutting modes: blade return, non-running, or running without blade return after the cut end.
Optional Tables
Roller Tables
Optional Loading/Unloading Roller Table:
- Roller conveyor suitable for both loading and unloading purposes. It has a length of 1.5m, 1 pedestal, and a maximum loading capacity of 1500kg.
Optional Unloading Roller Table:
Unloading roller table equipped with a digital display and manual movement. Two options available:
- RTL3KS600: Measuring 3m in length, with 3 pedestals and a maximum loading capacity of 3000kg.
- RTL6KS600: Measuring 6m in length, with 5 pedestals and a maximum loading
- capacity of 6000kg.
Optional Unloading Roller Table with Length Stop:
Unloading roller table featuring a length stop and selection of lengths using a keyboard. Two options available:
- RTP3KS600: Measuring 3m in length, with 3 pedestals and a maximum loading capacity of 3000kg.
- RTP6KS600: Measuring 6m in length, with 5 pedestals and a maximum loading capacity of 6000kg.
Optional Motorised Loading Roller Table:
Motorised roller tables for loading, driven by chain transmission and motor reducer controlled by an inverter. The system includes a mobile keyboard. Multiple options available:
- 3m length, loading capacity of 3000kg.
- 6m length, loading capacity of 6000kg.
- 9m length, loading capacity of 9000kg.
- 12m length, loading capacity of 12000kg.
Optional Motorised Unloading Roller Table:
- Motorised unloading roller table (including optional digital stop) with chain transmission and motor reducer controlled by an inverter. This option is only available when purchased together with the loading roller table. Multiple options available:
- 3m length, loading capacity of 3000kg.
- 6m length, loading capacity of 6000kg.
- 9m length, loading capacity of 9000kg.
- 12m length, loading capacity of 12000kg.
Optional Digital Reading Length Stop:
Digital reading length stop with manual positioning and automatic slowdown sensors. This option is only available when purchased together with the motorised unloading roller table. Multiple options available:
- 3m measuring length.
- 6m measuring length.
- 9m measuring length.
- 12m measuring length.
Optional Motorised Length Stop:
Numerical control motorised measurement RR with fast approach and automatic slowdown of the piece. This option is to be ordered alongside automatic conveyors. Multiple options available:
- RR6S: 6m measuring length.
- RR9S: 9m measuring length.
- RR12S: 12m measuring length.
Optional Duo Vertical Rollers:
- Pair of steel containment vertical rollers. A maximum of 2 pairs can be used for each 1.5m element.
Optional Single Vertical Roller:
- Single vertical roller with a height of 250mm to prevent falls. A maximum of 2 can be used for each 1.5m.